Is your New Bright RC truck not working? There could be a myriad of reasons behind the rig’s sudden inactivity, but often, the problem is not as dire as you had initially feared. Why is your New Bright RC unit not moving, and what can you do about it? Stay with us, and we all tell you all about it.
New Bright RC Truck Not Working – Quick Guide
Causes | Troubleshooting Guideline |
| The Transmitter And Receiver Have Lost the Connection | Rebind The Transmitter And The Receiver |
| Damaged Transmitter/Receiver/Antenna | Repair/Replace The Damaged Part |
| Battery Issues | Recharge The Battery/ Put In A Fresh Battery Pack/Put The Batteries In The Right Slot |
| Wrong Transmitter And Receiver Frequency | Choose Transmitter And Receiver That Have Matching Frequency |
| Wrong Servo Connection | Connect The Servo To The Correct Channels |
| Slipping Gears | Reset Your Gears |
Possible Causes of Why New Bright RC Truck Not Working with Solutions
There could be several reasons why your New Bright RC truck is not working. Here are a few common possibilities:
1. The Transmitter And Receiver Have Lost the Connection
Your New Bright RC will not move an inch if the connection between the transmitter and the receiver breaks down. This could happen for technical reasons like electromagnetic interference or something as mundane as the RC going outside the transmitter range. Check the transmitter and the receiver indicators to make sure that they are disconnected.
Solution
You must rebind the transmitter and the receiver to re-establish the connection. Switch off your New Bright Truck and the transmitter before starting the rebinding process. Open the receiver box to find the link button. Switch on the transmitter and the vehicle afterward. Hold on to the link button on the receiver and the set button on the transmitter.
It will take a few minutes for the rebinding process to complete. Once it’s done, the receiver indicator and the transmitter indicator will turn green. Keep away cellphones, motors, and other electronic appliances that might cause electromagnetic interference when you are trying to bind an RC receiver and a transmitter.
2. Damaged Transmitter/ Receiver/ Antenna
Trying to rebind the transmitter and receiver will be futile if both or any of them are damaged. The antenna could be at fault as well. If the rebinding keeps on failing, then you should inspect the equipment. Try the transmitter with a separate RC; if it works, the fault must be in your receiver or the antenna.
Solution
Diagnose the faulty equipment and replace it. You can try repairing it, but in many cases, the damage is irreversible. That said, you should try to service the bad equipment before splashing money on new paraphernalia. If the servicing cost appears to be too much, it would be wiser to get new components.
3. Battery Issues
Checking the batteries is the basic instinct of any RC driver whenever the unit stops working, and in many cases, the problem lies in the batteries. The batteries could be drained out. Or they might be put in the wrong slots. Old, corroded batteries might also stop working even if they don’t fully run out of juice. Check the transmitter battery as well.
Solution
Recharge the batteries and put in new batteries if you deem them necessary. Check the battery compartment for signs of damage. If the compartment is damaged, the unit might not be able to draw power from the batteries. You must repair the battery slot before installing new batteries.
4. Wrong Transmitter And Receiver Frequencies
The transmitter and the receiver must have the same frequency. For example, if the receiver is designed to receive 27MHz frequencies, you must use a 27 MHz transmitter for your New Bright truck. If the transmitter and the receiver are of different frequencies, they will never bind.
Solution
Check the packaging of your New Bright RC truck to find out its frequency. It could be a 27MHz, 49MHz, or 2.4GHz unit. You need to get a similar frequency transmitter to operate the vehicle. If you are trying to run the vehicle for the first time with a new transmitter, make sure that the frequencies match. We would also recommend using New Bright transmitters.
5. Wrong Servo Connections
Sometimes the RC might not move if you have slotted the servo leads to the wrong ports. You might see the vehicle responding to some commands, even though it’s standstill. For example, you might be able to move the wheels. This means that the steering servo is in the right slot and it’s functioning perfectly. But the other connections need to be looked at.
Solution
Check the wiring diagram of your New Bright RC truck. If the servos are not plugged in correctly, unplug them and put them back properly. If the car still doesn’t move, there might be something wrong with the servos. If possible, install the servos on a working receiver. If they are still irresponsive, you need to get new servos.
6. Slipping Gears
It’s possible that slipping gears are at the root of the problem. If the gears are slipping, your New Bright RC truck might move very sluggishly or not at all! If this is the case, you should hear a high-pitched grinding noise when you switch on the truck. Check the gear first if you see similar symptoms in your vehicle.
Solution
The gear mesh might have gotten loose and the plastic-made spur gear might have stripped. It’s not necessary to replace the gears unless they are stripped. If the gear remains unstripped, all you have to do is to tighten up the pinion gear and realign it with the spur gear. Insert a small strip of paper between the pinion and spur gear while tightening them. Remove it afterward.
Final Words
Try out these hacks if your New Bright RC truck is not working all of a sudden. However, make sure that you have both the transmitter and the vehicle switched on beforehand. Yes, it’s a silly mistake, but it happens more often than you think. So, make sure you have covered the basics before you get into a more intense problem-solving mode.
Happy RC-ing, you all!
- SCX24 Motor Upgrade Guide 2024 [Step By Step] - January 1, 2024
- RC Helicopter Shaking – 4 Reasons And Solutions! - September 24, 2023
- 1/10 vs 1/16 Scale RC – Which One Should You Purchase? - September 24, 2023