Dromida SC4.18 Troubleshooting- We Unfold Everything!

Noticed anything odd after running your favorite Dromida SC4.18 car? It might be due to overheating issues. Maybe the car’s batteries required to change as soon as possible.

A few more reasons might get listed here. But which issues do you need to take action on first? Worry not, we have found two major issues to troubleshoot.

So, how can you execute Dromida SC4.18 troubleshooting?

Overheating comes first to Dromida SC4.18 as the key setback just like other RC cars. While running this radio-controlled car for around 15 to 20 minutes, it starts catching heat. And, firing chances exist to some extent. In the meantime, running through water might damage the bearings of this car.

That’s not everything. We will brief in-depth in the upcoming sections. So, stick with us to get the spilled beans.

Top 2 Dromida SC4.18 Troubleshooting Along with Reasons

That’s pretty much enough to give you a basic idea. We should jump on exploring the reasoning.

With these, you will get the possible solutions unfolded here. So, let’s grab all of these!

Problem 1: Overheating

Almost every RC car might force you to experience this issue. However, depending on how late this issue arises is considered a “better” trait of particular RCs. 

Reason

In the case of Dromida SC4.18, you will find it getting hot after 15 minutes. So, basically, this heat gets generated from the motor. That’s why we felt you should know the cooling down process.

And without keeping the RC run shorter, chances are high to make the chassis faulty. Along with that, catching fire can be another suspicion. The motor might catch heat over 180 degrees while running for 30 minutes.

In the meantime, this heat is quite higher than the safety guidelines. As a result, you might not expect a durable and efficient motor again from there!

Solution

Ventilation comes parallel to overheating Dromida SC4.18. And, it is considered the key factor behind overheating.

First of all! Check- RC car gets enough air or not to keep the motor cooled down constantly. Adequate airflow also ensures keeping the ESC in a good state.

To ensure this, cut a vent first with the help of power tools. At the top, you will find vents for cutting to provide more fresh air.

Check whether other components of the RC are intercepting airflow while reaching the motor or not. When you work on this, be mindful and take safeguards.

Now, you require fanning the motor once you have got some room sparing. Now, get a fan plugged into the receiver’s null port. A Y-cable can be effective in splitting the wire.

You might utilize a clip-on heat sink too. These tools come in tinier sizes and are very handy to reduce overheating.

And lastly, don’t forget to upgrade the bearing. You might choose a stainless steel bearing to replace the brushless motor.

Along with that, ceramic hybrids are quite handy too in lessening the rolling resistance. Finally, you can expect to have a longer duration of running throughout the Dromida SC4.18 car.

Problem 2: Running Through Water Damaging Bearing

Though the manufacturer calls this model waterproof, it isn’t the same in real life. In the meantime, the bearing faces a whole lot of trouble while getting through water. So, we should know how to make the bearings smoother. 

Reason

While the boat faces strong tides and goes into the sea’s middle, this can happen. Depending on the robustness of the boat, it might not suit that water flow. Once water gets into the boat, your bearings are the key parts to get affected first.

Worry not, we will explain how to solve this in simply 3 steps. And, you can apply this procedure as a DIY project.

Solution

To have the rebuild, no heavy changes are required. You might find the shocks working fine as well as other parts too. Once you seize all the bearings up, you will find screws getting rusted.

Let’s get the whole solution step by step!

Step 1: Breaking Out the Wrenches

First of all, you should consider cleaning and oiling the bearings. In the meantime, hub carrier bearings might bring much trouble to remove.

You can utilize the axle and insert this partly. Lastly, you need to wiggle this. However, this plan might go wrong.

That’s where you need to remove the axle totally. Then, get a screwdriver or hex wrench to pound the bearing out from the inner side.

Remember, not to hit the bearing seal at the same time. Apart from this, smashing a dent in the seal might vandalize the bearing forever.

Step 2: Inspecting and Cleaning

Once all the bearings are out, offer them motor spray and wipe. Via a rag, you can easily clean the external part up. 

And check if you find any dented or skipping seals or not. Everything’s good? Then, it’s time to clean.

In the meantime, the lesser usage of the water-oriented cleaner here, the better. The rusted bearing might face early wear or relevant damages due to this.

Here’s a tip-

Use acetone to clean metal-shielded bearings up. And, remove all the old tires. 

Step 3: Lubrication

Finally, we are moving to the last step. As oiling comes into the picture, you should acknowledge the negative parts of utilizing grease.

While using this, you will find the Dromida SC4.18 carrying much dirt the next time. In this situation, get any thin-bearing oil from hardware shops and apply!

Only a few oil drops can be enough while using rubber-sealed bearings.

I like to be able to spin metal-shielded bearings while oiling them. The oil gets bleeding past the shield a bit faster during this period.

Once the bearings are oiled, you will see them circling freely the next time. Still, the bearings are gritty? Then, you should hire an expert.

Here’s another tip-

You might use a small applicator while applying oil. 

FAQs

Why Is My RC Car Not Moving?

While finding RC cars not moving, it indicates the worn out or damaged motor. On a toy RC, the wires will commonly manipulate a circuit board. So, there might be required to re-solder any broken, loosen, or destroyed connections. Getting no steering or soundlessness also points out the same thing.

What Is Bashing In RC Cars?

In the RC world, bashing is considered a test competition. And, this will not fall under any rules or regulations or penalties. The only thing you need to do is test the RC vehicle’s limits. Making higher jumps without risk concern is welcomed. Also, bashing suggests not to worry about the landing.

Why Is My RC Remote Blinking?

While the remote blinks, try to remove all the batteries from the controller and the car. And, re-attach them after you wait around 30 seconds. Then, activate the car and controller to check if the previous issue still exists or not. Along with that, you might require getting new batteries.

Final Words

Now, you know how Dromida SC4.18 troubleshooting can be executed. We tried hard to provide you with the biggest factors behind this RC car trouble. Hope that you have found our article useful.

That’s all from today! Let us know your thoughts through comments.

Signing off!

Chris Goforth

Leave a Reply

Your email address will not be published. Required fields are marked *